Craftsman 580.752710 Instrucciones De Uso página 6

KNOW YOUR PRESSURE WASHER
_Read the owner's manual and safety rules before operating your pressure washer,
....... Compare the illustrations with your pressure washer to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
Spray Gun Nozzle Extension with
Quick Connect
ProjectPro
TM
Nozzles
High Pressure Hose
Recoil Starter
Fuel Tank
Hose Reel
Throttle Lever
Oil Fill Cap/Dipstick
Air
Choke Lever
Water inlet
High Pressure Outlet
\
\
Pump equipped with
Automatic Cool Down System
Air Filter -- Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Reservoirs = Used to provide detergent or
other chemicals to the low pressure water stream.
Choke Lever -- Prepares a cold engine for starting.
Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet -- To connect high pressure hose.
Hose Reel -- Used for storing hose while unit is not in
use. Hose must be detached from pump and spray
gun before storage.
Nozzle Extension with Quick Connect -- Allows you to
switch between four different spray nozzles.
Oil Fill Cap/Dipstick -- Check and fill engine with oil
here. See page 18 for oil recommendations and filling
instructions.
ProjectPro
TM
Nozzles -- Detergent, Max, General,
and Delicate Nozzle: for various cleaning applications.
Pump -- Develops high pressure.
Recoil Starter -- Use for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Throttle Lever--Sets engine in starting mode for
recoil starter and stops a running engine.
Water tnlet -- Connect garden hose here.