Ferroli AT 18 Manual De Instalación, Uso Y Mantenimiento página 48

Menu 02
User adjustments
Menu 03
User settings
Menu 04
Boiler status
Menu 05
technician settings
Menu 06
Installer settings
4.6.1 Menu 01 – Chrono setting
Allows all chronothermostat functions to be enabled/disabled;
select ON to activate the function and display the relevant
segment/LED [ D ]
When Daily, Weekly or Week End programming is entered, the
appropriate segment/LED [ C ] appears in the top right of the display.
Regarding selections and entering times,
use the buttons according to the table in par. 4.2.
By accessing the submenu: DAY PROGRAM, the daily
chronothermostat functions can be enabled/disabled and set.
It is possible to set two operation stages delimited by the
times set according to the following table where the setting
OFF tells the clock to ignore the command.
Selection Meaning
START1 activation time
STOP1 deactivation time
START2 activation time
STOP2 deactivation time
By accessing the submenu: WEEK PROGRAM it is possible to
enable/disable and set the weekly chronothermostat functions.
The weekly programmer has 4 independent programs whose final effect
consists of a combination of the
4 programmings.
The weekly programmer can be activated or deactivated;
also, by setting OFF in the time field, the clock ignores the
corresponding command.
Carry out programming making sure not to overlap the hours of
activation and/or deactivation on the same day in different programs.
M1-4 Week-End Program
M-2-1 Set Clock
M-2-2 Standby mode
M 2-3 Initial load
M 2-4 Pellet type
M 2-5 Initial load auger 2
M-3-1 Language
M-3-3 Buzzer mode
M-3-4 Lighting
M-3-6 Heating Delta
M-3-7 Storage tank-Puffer Delta
M-3-8 Pellet level
M-3-9 DHW control
Possible Values
M-1-3-26
M-1-3-27
M-1-3-28
M-1-3-29
M-1-3-30
M-1-3-31
M-1-3-32
M-1-3-33
M-1-3-34
M-1-3-35
M-1-3-36
M-1-3-37
M-4-2-01
M-4-2-02
M-4-2-03
M-4-2-04
M-4-2-05
menu for technician
menu for technician
menu for technician
time - OFF
time - OFF
time - OFF
time - OFF
48
Friday Prog-3
Saturday prog-3
Sunday Prog-3
Start Prog-4
Stop Prog-4
Monday Prog-4
Tuesday Prog-4
Wednesday Prog-4
Thursday Prog-4
Friday Prog-4
Saturday Prog-4
Sunday Prog-4
Week-End Chrono ON/OFF
Start 1 Week-End
Stop 1 Week-End
Start 2 Week-End
Stop 2 Week-End
On/Off
On
Pellet adjustment (-9 - +9)
On
--
On/Off
(0 - 100)
(0.5 - 20)
(0.5 - 20)
On/Off
ON/OFF/EST
C
D
Menu level
Input
AT 18