Installing The Leaf Light Kit - Lkhf7260Bz - Fanimation HF7200 Serie El Manual Del Propietario

Installing the Leaf Light Kit – LKHF7260BZ
Leaf Fan Model:
CAUTION
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before installing light
kit.
1. Remove the plug, lockwasher and nut from the bottom
of switch cup cover.
3. Locate white and blue wires labeled "FOR LIGHT".
Securely connect white-to-white and blue-to-black wires
as shown. Push the connectors under the edge of the
receiver unit housing.
Figure 1
IMPORTANT!
Align Green
Dots
Figure 3
▲WARNING
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
2. Mount bowl fitter unit on switch cup cover with lockwasher
and nut provided.
4. Carefully connect the main connector & antenna wire
connector and push all wires back into switch cup housing
of fan.
14
Figure 2
IMPORTANT!
Align Orange
Dots
Figure 4