Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BEFORE USE
PLACE OF USE
• Do not use the massage lounger where it will be exposed to direct sunlight for long periods of time.
Overexposure to harsh light can discolor or harden the cover.
• Do not use the massage lounger in hot or humid places or places where it may become wet from rain,
splashing or dripping water, etc. Water and heat can cause discoloring and mildew.
NOTE:
Position the chair at least 16 in. (40 cm) away from any wall or other obstacle to ensure adequate reclining
space.
TURNING ON THE POWER
First read and familiarize yourself with the safety precautions.
1. Plug the power cord into the inlet located at the rear of the chair.
2. Plug the power cord into an AC outlet.
NOTE:
Be careful not to pinch the cord under the leg frames of the chair or any other objects.
Power switch
Controller
Controller storage pocket
3. Using a flat head screwdriver or similar object, insert into the lock
switch and turn to "open".
4. Move the power switch to "on".
• When the operating lock switch is pointing toward "lock", the power
switch cannot be moved to the "on" position.
After each use
• Be sure to turn the power switch to "off".
• To prevent children from using this unit, lock the power switch by
moving the operating lock switch to the "lock" position.
• As a further precaution, unplug the power cord from the outlet after
each use.
BEFORE SITTING DOWN
Do not exceed the maximum user weight of 264 lbs. (120 kg).
Before sitting down, you must first check the position of the massage
heads with your hands.
• The massage heads should be spread apart near the top of the
massage lounger backrest in the resting position.
• If the massage heads are not in their resting position, do not sit down in
the massage lounger. Press the "on/off" button on the controller twice.
Wait for the massage heads to reach the resting position before sitting
down.
After making sure the massage heads are in the resting position, sit
down slowly in the center of the massage lounger.
8
Operating lock
switch
NOTE:
The operating lock
switch prevents the unit
from being turned on
when switch is in the
"lock" position.
Power plug
Power switch
on
off
on
off
Tabla de contenido
