Husqvarna TC 2011 I.E. Serie Manual Del Usuario página 88

REAR BRAKE PEDAL POSITION ADJUSTMENT
The position of the rear brake pedal with respect to the
footrest may be adjusted according to individual needs.
For adjusting, proceed as follows:
- loosen the screw (1);
- turn the cam (2) in order to raise or lower the brake
pedal (3) within the range available (A);
- the operation done, tighten the screw (1). Once this
adjustment is completed, adjust the free play of the
pedal as follows.
3
EN - 34
REAR BRAKE PEDAL FREE PLAY ADJUSTMENT
Before staring the braking action, rear brake pedal (3)
shall have a free play (B) of 5 mm (0.196 in).
Should this not happen, operate as follows:
- loosen nut (4);
- operate the pump rod (5) to increase or decrease the
free play;
- tighten nut (4) at the end of the operation.
5
2
4
1
A
WARNING*:
When the free play requirement is not
met, the brake pads will be subjected
to an early wear that may lead to TOTAL
BRAKE INEFFECTIVENESS.
B
3