Installation Instructions - Presto 70558 Instalación

ENGLISH

1) INSTALLATION INSTRUCTIONS

2) Mixers with hand shower
3) PRECAUTIONS FOR USE (The product guarantee depends on the respect for these rules)
INSTALLATION and START UP
For products delivered with filters, these must be installed in accordance with the instructions.
Before commissioning any of our valves, it is essential to carefully drain
the pipes that can damage the mechanisms or water passages (PRESTO® heads that can be dismantled from
front).
Recommended operating pressure according to NF EN 816: 1 to 5 bars.
CLEANING
The chrome-plated coating of PRESTO® valves must be cleaned only with soapy water.
Abrasive, acid, alkaline or ammonia-based household products are prohibited.
4) maximum
5) ! Maximum tightening of hoses: 1m.M (tightening by hand recommended).
Non-return bushing MF G1/2'' mandatory installation (2)
6) ACCESSORIES
7) HAND SHOWER
8) Hose
9) Spring
10) SPARE PARTS
11) DESCRIPTION
12) HAND SHOWER LEVER
13) SPOUT LEVER
14) MIXER LEVER
15) WALL-MOUNTED BRACKET
16) FIXED SPOUT
17) CERAM. HEAD 1/4 turn G1/2"
18) COMBINATION CARTRIDGE
19) 2 NON-RETURN BUSHINGS
20) SINGLE-HOLE SINGLE CONTROL MIXER + HAND SHOWER
21) SINGLE-HOLE SINGLE CONTROL MIXER + HAND SHOWER + FILLING SPOUT
22) SINGLE CONTROL WALL-MOUNTED MIXER + HAND SHOWER
23) SINGLE CONTROL WALL-MOUNTED MIXER + HAND SHOWER + FILLING SPOUT
24) This document is not contractual; we reserve the right to modify the characteristics of our products without
notice.
25) PATENTED and REGISTERED MODELS