Installation Instructions - Presto 23644 Guia De Instalacion

ENGLISH

1) INSTALLATION INSTRUCTIONS

2) Foot operated taps
3) PRECAUTIONS FOR USE (The product guarantee depends on compliance with these instructions)
ASSEMBLY AND USE
For products delivered with filters, these must be installed in accordance with the instructions.
Before commissioning any of our valves, it is essential to carefully drain the pipes that can damage the
mechanisms or water passages (PRESTO® heads that can be dismantled from front).
Recommended operating pressure according to NF EN 816: 1 to 5 bars.
To ensure the good functioning of the pedal, it's important that the tap is fitted on a flat surface (see drawing
page 2)
CLEANING
The chrome-plated coating of PRESTO® valves must be cleaned only with soapy water.
Abrasive, acid, alkaline or ammonia-based household products are prohibited.
MAINTENANCE
Never lubricate the internal mechanism, particularly the caps and valve seals.
4) Flat surface (120x250mm), limited to the positioning area of the tap
5) Setting example
6) Silicone
7) Flat surface
8) Outlet
9) Inlet
10) Hot water inlet
11) Cold water inlet
12) This document is not contractual; we reserve the right to modify the characteristics of our products without
notice.
13) PATENTED and REGISTERED MODELS