KENMORE ELITE 795.7107 Serie Manual De Uso Y Cuidado página 11

NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a
narrow opening. If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE DOOR HANDLES
Handle appearance may vary from
NOTE:
illustrations on this page.
1. Removing Refrigerator Handle
• Loosen the set screws with a 3/32"
(2.5mm) Allen wrench and remove the
handle.
NOTE: If the handle mounting fasteners
need to be tightened or removed, use a
1/4" (6.4mm) Allen wrench.
2. Removing Freezer Drawer Handle
• Loosen the set screws located on
the lower side of the handle with a 1/8"
(3.1mm) Allen wrench and remove
the handle.
NOTE: If the handle mounting fasteners
need to be tightened or removed, use
a 1/4" (6.4mm) Allen wrench.
REFRIGERATOR INSTALLATION
Set Screw
Allen
Wrench
11
Mounting
Fasteners