Using The Machine Connecting/Disconnecting; Making A Cut - Sima COBRA 30 PRO Manual De Instrucciones Original

6.3 USING THE MACHINE CONNECTING/DISCONNECTING.

Starting the engine:
• Man oeuvre the machine so that the blade is a few centimeters from the floor surface.
• Turn the engine switch to ON
• Open the fuel valve.
• Open the choke. (Not necessary if the engine is warm or conditions are hot)
• Putt he gas lever in the slight acceleration position.
• Start the engine by pulling the starter cord.
• Let the engine warm up and then closet he choke adjust the gas lever depending on the revolutions
required for each project.
• To stop the motor turn the motor switch to the off position.
• Closet he fuel feed
For more details on operating the motor please refer to your instruction manual.

6.4 MAKING A CUT.

Starting the motor:
12
ENGLISH