Olimpia splendid PELER 6C Instrucciones Para La Instalación, Uso Y Mantenimiento página 52

3.4.g - "Ionizing" function button (A8)
When the appliance is on, pressing this button will activate the ionizing function and
the relative LED (B5) will light up. This function leaves the air fresher in the room.
Press the button again to deactivate the function.
3.4.h - Cooling/humidifier key (A2)
When the appliance is running, press this key to start or stop the cooling/humid-
ifier function.
Press it once to start the function; the pump (4) and the cooling/humidifier LED
(B4) switch on.
Press it a second time to stop the function.
3.4.i - Water shortage function
When the cooling function is on ("B4" LED on), if the appliance detects lack of
water for 5-10 consecutive seconds, it will sound a beep, the (B4) LED will flash,
the pump (4) will stop working and the function will be disabled.
3.4.l - Use of ice box containers (19)
The appliance comes with two ice boxes (19) that can be used to cool down the
air it emits.
The use of the "cooling" function with an ice box (19) placed in the water com-
partment quickly reduces the temperature of the air emitted by the appliance by
3° C approximately.
To use this function:
a. Put the ice boxes in the freezer and wait until they are frozen.
b. Place a frozen ice box in the water reservoir (7) or in the upper water com-
partment (fig.M).
c. Pour water (preferably cold) in the reservoir or in the upper water compart-
ment, without exceeding the "MAX" level indicated.
d. Start the appliance and select the function by pressing the button (A2); the
corresponding LED (B4) will light up.
To exploit the function as well as possible, keep an ice box in the freezer and use
it to replace the one in use when no longer frozen.
EN - 19