EN
10
USE
10.1
ATTENTION
10.2
INTRODUCTION
To have the best performance with the lowest consumption please follow the here descripted instructions.
• The lightning of the pellets occurs very easily if the installation is correct and if the chimney flue is efficient.
• Switch on the stove at Power 1 for at least 2 hours in order to enable the materials which make up the
boiler and the fireplace to adjust the inner springing stress.
• Oily plant waste and lacquers can cause smells and smoke during the first working hours: it is advisable
to ventilate the room because they could be noxious to people and animals.
• By using the stove the varnish inside the combustion chamber could be subjected to alterations. This
occurrence can be attributed to different reasons: an excessive stove overheating, the presence of
chemical agents in bad quality pellets, bad chimney draught, etc. Therefore varnish endurance in the
combustion chamber cannot be guarantee.
64
Do not cover the hot air outlet slits with any object to avoid stove's overheating!
The stove is not suitable for food cooking.
This appliance must not be used by people (childreen included) with reduced mobility,
psycological deseases or without experience and knowledge except in case of
supervision or instruction about the use of the appliance by people responsible for their
safety.
Childreen must be constantly overseen in order to assure that they do not play with the
appliance.
The stove is provided with a hand rejector: this rejector can be removed exclusively by
the stove manufacturer or by the Technical Assistance Service.
During its running, the stove reaches high temperatures: keep away childreen and
animals and for your safety please use appropriate fireproof devices, such as heat-
protecting gloves.
Set values from 1 to 5 are defined by the manufacturer and they can be changed only
by an authorized technician.
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY