Connection To The External Thermostat; Ventilation - Cadel NICE Manual De Instalación, Uso Y Manutención

• Please further assure you that your network is endowed with an efficient earth connection: if it does not
exist or if it is not efficient, please endow you with one in compliance with the law.
• Connect the supply cable first on the back of the stove (see Fig. 19 page 63) and then at a wall
electric socket.
• The master switch O/I (see Fig. 19 page 63) is to open only to switch the stove on, otherwise it is
advisable to keep it off.
• Do not use extension cables.
• If the feeder cable is damaged, it must be replaced by an authorized technician.
• When the stove is not going to be used for a long period of time, it advisable to remove the plug from
the socket on the wall.
9.6

CONNECTION TO THE EXTERNAL THERMOSTAT

The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected
to an external room thermostat. This operation must be executed by an authorized technician.
For connection see WIRING SCHEME page 84:
• external thermostat: set up a temperature which is round 7°C.
• External chronothermostat: set up a temperature which is round 7°C and desable the chrono functions
from the menu 03-01.
9.7

VENTILATION

• The stove is endowed with a ventilation system.
• The air blown from fans keeps the appliance at a low temperature range in order to avoid high stresses
to the materials which make it up.
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
Fig. 19 - Electric socket with master switch
Fig. 20 - Do not cover air slits
EN
63