Pentair Intellibrite 5g white led Guia De Instalacion página 12

REPLACING THE INTELLIBRITE 5G WHITE POOL LIGHT CIRCUIT
BOARD ASSEMBLY (IN AN EXISTING POOL)
When replacing or reassembling the IntelliBrite White Pool Circuit
Board, the Gasket (P/N 79101600Z) or Gasket and Lens (619864Z) MUST
ALSO BE REPLACED
1. Turn off main electrical switch or circuit breaker, as well as the switch
which operates the IntelliBrite light itself.
2. Before starting make sure that you have a new lens gasket (P/N 79101600Z)
and a IntelliBrite 5g white pool light circuit board assembly (see last page)
ready to install.
with the same type will damage the light assembly and may cause an electrical
hazard resulting in death or serious injury to pool users, installers, or others due to
electrical shock, and may also cause damage to property.
Always install a new lens gasket (P/N 79101600Z) whenever
disassembling the IntelliBrite light assembly. Failure to do so may
permit water to leak into the assembly which could cause:
an electrical hazard resulting in death or serious injury to pool users, installers, or
others due to electrical shock, or breakage of the lens, which likewise could result
in serious injury to pool users, installers, or bystanders, or in damage to property.
3. REMOVING THE INTELLIBRITE 5G WHITE POOL
LIGHT ASSEMBLY: Remove the pilot screw at top
of face ring, remove the light assembly from the
niche. Place the assembly on the deck. Note: It is
not necessary to drain down the pool.
4. Unwind the cord from the base of the light housing.
Be sure to keep the pilot screw from the IntelliBrite light. This
screw mounts and electrically grounds the housing securely to
the mounting ring and wet niche. Failure to use the screw provided could create an
electrical hazard which could result in death or serious injury to pool users, installers
or others due to electrical shock.
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION
Always disconnect power to the pool light at the circuit breaker
before servicing the light. Failure to do so could result in death
or serious injury to installer, service person, pool users, or
others due to electrical shock.
Replace the light circuit board assembly with the same type and
wattage. Failure to replace the light circuit board assembly
D A N G E R !
IntelliBrite 5g White Pool Light
Pilot screw (bronze)