Pentair Intellibrite 5g white led Guia De Instalacion página 17

Coil at least 1 meter of cord around the light fixture
21.
(see Figure 1). This allows the light to be serviced
after the pool is filled with water.
22. Install the special bronze pilot screw at the
top of face ring to secure the light to the
niche.
23. Final check for proper IntelliBrite light
operation: Switch on the main switch or
circuit breaker to the system and the switch
that operates the IntelliBrite underwater light
itself. The light should illuminate when power
is applied. If not recheck the installation
steps starting with Step 1.
Wide and Narrow Angle Lens Adjustment
Unique Wide and Narrow Angle Lens Feature
The unique IntelliBrite light lens geometry provides a choice of "wide" or "narrow" angle
light beam to suit various size pools. For lights located on either side of the pool, rotate
the lens to the 'wide' (W) angle position, which will provide a wider angle light beam for
greater underwater coverage and light reflection the width of the pool. For lights located
either end of the pool, rotate the lens to the 'narrow' (N) angle light beam position for
increased underwater light intensity and distance. Note: The IntelliBrite light lens ships
from the factory in the 'WIDE' (W) angle position.
WIDE ANGLE LIGHT BEAM
(FOR SIDES OF POOL)
Pilot screw (bronze)
IntelliBrite Pool Light
WIDE ANGLE
LIGHT BEAM
NARROW ANGLE LIGHT BEAM
(FOR ENDS OF POOL)
17