Attaching The Flue Duct - Gaggenau AI 2 Serie Instrucciones De Uso Y Montaje

Connecting the pipes
Note: If using an aluminium pipe, smooth the
connection area beforehand.
Exhaust-air pipe Ø 150 mm (recommended size)
Attach the exhaust-air pipe directly to the air-pipe
connector and seal.
Exhaust-air pipe Ø 120 mm
1 Attach the reducing connector directly to the air-
pipe connector.
2 Attach the exhaust air pipe to the reducing
connector.
3 Seal both joints appropriately.

Attaching the flue duct

m
Risk of injury!
From sharp edges during installation. Always wear
protective gloves while installing the appliance.
1 Separate the flue ducts.
To do this, remove the adhesive tape.
2 Remove the protective foil from both sides.
3 Place both parts of the upper flue on the appliance
and push together.
Note: The slots of the upper flue must point
downwards.
4 Push up the upper flue part and secure with 2
screws.
5 Insert both lower parts of the flue and push
together.
29