Idiomas disponibles
Idiomas disponibles
9" (22.9 cm)
Max
21"
(53.3 cm)
3-1/8" (7.9 cm)
3-1/2" (8.9 cm)
Product Information
Applicable product:
Drop-in rim style, custom pump
Fixture*:
Bathing well:
Basin area, bottom
43" (109.2 cm) x 21-9/16" (54.8 cm)
Basin area, top
53-1/2" (135.9 cm) x 32-1/8" (81.6 cm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
Pump: 1-speed
Minimum access panel
pump/control (required):
Included components:
Cut-out template
1042014-1-C
Pump/Control Access
10-13/16" (27.5 cm)
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1162-CB
120 V
60 Hz
7.5 A
20" (50.8 cm) W x
15" (38.1 cm) H
1042556-7
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
19-1/2"
42" (106.7 cm)
(49.5 cm)
21"
(53.3 cm)
1-1/2" OD
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (171 kg/square meter) loading.
The suction line extends 1/8" (3 mm) beyond the edge of the rim.
The pump base extends 9" (22.9 cm) beyond the edge of the rim.
Modify the framing as needed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim Detail
120 V, 15 A, 60 Hz
Kohler Co.
