Idiomas disponibles
Idiomas disponibles
21"
(53.3 cm)
3-3/4"
(9.5 cm)
11-1/16" (28.1 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Drop-in rim style, custom pump, heater
Fixture*:
Bathing well:
Basin area, bottom
55" (139.7 cm) x 23-1/4" (59.1 cm)
Basin area, top
64" (162.6 cm) x 32" (81.3 cm)
Weight
132 lbs (60 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
78.5 gal (297 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
Pump: 1-speed
Heater: 1.5 kW
Minimum access panel
pump/control (required):
1047187-1-C
Pump/Control Access
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1114-HB
70-1/2" (179.1 cm) x
40-1/2" (102.9 cm)
V
Hz
A
120
60
7.5
120
60
12.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
1-1/2"
(3.8 cm)
19-1/2"
(49.5 cm)
1-1/2" OD
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
41 lbs/square foot (199.6 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
42" (106.7 cm)
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.
