Emptying The Grass Catcher; Replacing The Cutting Blade; General Maintenance - Ryobi RLM4614 Traducción De Las Instrucciones Originales

EMPTYING THE GRASS CATCHER

See figure 8.
■ Stop the mower and wait for the blade to come to a
complete stop.
■ Lift the rear discharge door.
■ Grasp grass catcher by its handle and lift to remove
from mower.
■ Empty grass clippings.
■ Lift the rear discharge door and reinstall the grass
catcher.
WARNING
Use extreme caution when lifting or tilting the machine
for maintenance, cleaning, storage, or transportation.
The blade is sharp, even though the engine is shut off,
the blades can still be moved. Keep all body parts away
form the blade while it is exposed.
MAINTENANCE
WARNING
After releasing the power lever, regularly check if the
blade stops in 3 seconds.
WARNING
If the machine is not maintained correctly then life span
of the tool may be reduced, and inbuilt safety features
may not function correctly, thus increasing the potential
for serious injury. Keep the product in good working
condition.
WARNING
When servicing, use only original manufacturer's
replacement parts. Use of any other parts may create a
hazard or cause product damage.
WARNING
Before performing any maintenance, stop the mower,
allow the blade to come to a complete stop, and
disconnect the spark plug wire from the spark plug.
Failure to follow this warning could result in serious
personal injury.

GENERAL MAINTENANCE

You may make adjustments and repairs described here.
For other repairs, contact the authorised service agent.
■ Avoid using solvents when cleaning plastic parts. Most
All manuals and user guides at all-guides.com
■
■
■
Do not at any time let brake fl uids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal
injury.
LUBRICATION
All of the bearings in this product are lubricated with
a suffi cient amount of high grade lubricant for the life of
the unit under normal operating conditions. Therefore, no
further bearing lubrication is required.
Always protect hands by wearing heavy gloves and/or
wrapping the cutting edges of the blade with rags and
other material when performing blade maintenance.
Improper handling of blade
personal injury.

REPLACING THE CUTTING BLADE

See figure 9.
Be careful during adjustment of machine to prevent
entrapment of fi ngers between moving blades and fi xed
parts of machine.
For best results, the mower blade must be kept sharp.
Replace a bent or damaged blade immediately.
Only use replacement blades approved by the
manufacturer of your mower. Using a blade not approved
by the manufacturer of your mower is hazardous and
could result in serious injury, damage your mower, and
void your warranty.
Drain the fuel fi rst before tilting the mower to replace the
blade.
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
Periodically check all nuts and bolts for proper tightness
to ensure safe operation of the mower.
Remove any buildup of grass and leaves on or around
the engine and engine cover. Wipe the mower clean
with a dry cloth occasionally. Do not use water.
Check the grass catcher frequently for wear or
deterioration.
WARNING
WARNING
could result in serious
WARNING
WARNING
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET HR
SL
SK
BG
UK
7