Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To actuate the fuel gauge, press and
hold the fuel gauge button (6A). A
combination of the three green LED
lights will illuminate designating the
level of charge left. When the level of
charge in the battery is below the
usable limit, the fuel gauge will not
illuminate and the battery will need to
be recharged.
note: The fuel gauge is only an indication of the charge left on the battery
pack. It does not indicate tool functionality and is subject to variation
based on product components, temperature and end-user application.
For more information regarding fuel gauge battery packs, please call
1-800-4-D
WALT (1-800-433-9258) or visit our website www.dewalt.com.
e
Switching On (Fig. 2, 7, 8)
CAUTION:
Do not point unit discharge at self or
bystanders.
CAUTION:
Always wear safety glasses and hearing
protection. Wear a filter mask if the operation is dusty. Use of gloves,
long pants and substantial footwear is recommended. Keep long hair
and loose clothing away from openings and moving parts.
To turn the blower on, depress the variable speed trigger (A). Release
the trigger to turn the blower off.
To lock the blower on, pull back on the speed lock lever (B), as shown
in figure 7. The blower runs at higher speeds as the lever is moved
further. The speed lock lever can also be pulled back to start the
blower without needing to first depress the trigger switch. To turn the
blower off when using the speed lock lever, push the lever toward the
front of the blower.
FIG. 6
6A
9
• Hold the blower with one hand as shown in figure 8 and sweep
from side to side with the tube (D) several inches above the hard
surface. Slowly advance keeping the accumulated pile of debris in
front of you.
FIG. 7
Accessories
WARNING:
any type of accessory or attachment. Such usage might be
hazardous.
Repairs
The charger and battery pack are not serviceable. There are no
serviceable parts inside the charger or battery pack.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments (including brush inspection and replacement) should
be performed by a D
WALT factory service center, a D
e
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• Warranty SerVICe: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
FIG. 8
DO NOT use the blower with
e
WALT
Tabla de contenido
