ProMinent DULCO Trans 25/700 PVDF Instrucciones De Servicio página 14

Safety instructions, Description of Motor, Sound intensity level
 Never operate the pump dry.
 Do not expose the pump to the weather.
 Clean the pump after each operation.
 Never store the pump in areas in which corrosive
vapours exist.
 Power supply must include a fault current breaker.
Dirt accumulation, high humidity or material damage on
the motor housing may lead to dangerous current surges.
In case of breakage or obvious damage of the housing
immediately stop the pump and repair it.
 Non-compliance with the safety instructions may cause
injuries to the operator, pollution of the environment or
damage to the pump and the motor.
Description of the Motor
 Internally cooled commutator motor with 2 speed switch and
overload cut-out switch
 Overload cut-out switch
If the maximum power is exceeded the motor switches off.
After cooling down the motor can be re-started again by
actuating the ON/OFF switch.
Sound intensity level
T he sound intensity level of this pump is < 70 dB (A) (measured

on the manufacturer's pump test stand)
14