STACK-ON QAS-450 Manual De Instrucciones página 4

SECURING THE SAFE
NOTE: This safe must be mounted to a shelf.
Failure to do so will compromise the safety and
security of the safe.
NOTE ON LOCKING THE SAFE: The safe
needs to be in an upright position, as shown in
figure 1, for the locking mechanism to function
properly. Failure to mount the safe in the
corrrect upright position will compromise the
safety and security of the safe.
Figure 1
Secure the safe to a shelf using the predrilled
mounting holes in the safe and hardware provided.
Place the safe in the desired location and mark the
mounting holes to be used with a pencil. Move the
safe and drill the pilot holes for the screws. For
mounting to a shelf, drill a 3/16" diameter pilot
hole and attach the safe using the 3/4" screws and
washers. (Figure 2)
Figure 2
IMPORTANT
Keep keys and your combination number in a secure
place, away from children. Keep this record of your serial
number and combination in a secure place separate from
your safe. To order a replacement key set, follow the
instructions on the attached form.
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
4
18
40286-1307