Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55

USING THE APPLIANCE

Before rst use
Unpack the appliance and keep all the packing material and foils for future use.
Check if the appliance is complete and undamaged.
Wash the frother container and accessories prior to rst use as describet in the chapter „Maintenance and
cleaning".
Using the frother
1.
Select the proper attachment (see the table above) and insert it in the frother container.
2.
Pour the appropriate amount of milk in the frother observing the minimum and maxcimum marks inside
the container.
3.
Fasten the lid on the frother. Then press the power button to turn on the frother.
• Frothing and heating milk: Use attachment 8. Press brie y the power button. The blue and red light
indicators light up. After completing the operation, the blue indicator turns o and the red ashes for
30 s.
• Heating milk: Use attachment 9. Press brie y the power button. The blue and red light indicators light
up. After completing the operation, the blue indicator turns o and the red ashes for 30 s.
• Frothing cold milk: Use attachment 8. Pour cold milk in the frother and press and hold (for
1–2 seconds) the power button. The blue indicator lights up. After completing the operation, the blue
indicator turns o and the red ashes for 30 s.
Attachment
Functions
Frothing cold milk
Frothing and heating
Heating (small amount of froth)
Advice and tips
Here are some useful tips to help you achive the best results when frothing milk:
Always use the frother for frothing or heating milk rst. While the milk is being prepared, you can make
co ee or cocoa and then serve immediately.
Use whole milk for the best results (fat content > 3 %).
This frother allows frothing of cold milk. That does not mean that you can cool the milk in it. The frother is
designed for use at normal room temperature.
The milk is heated to temperature 65 °C ±5 °C. This temperature is best for keeping the aroma of your
co ee and allows its immediate consumption.
Keep the attachments in a safe place. Since they are of small size they could get easily lost. The attachment,
which is not used can be fastened to the holder on the lid of the frother.
Allow the frother to cool down for 2 minutes before the next use to allow a reset the thermostat of the
appliance.
The frother is designed for frothing and heating of milk. If you add spices, co ee granules or hot chocolate
powder to the milk, do not forget to rinse the frother container thoroughly after use.
Recommendations for serving co ee
Here is a selection of beverages, which you can prepare quickly using this frother.
Max. capacity
115 ml
115 ml
240 ml
GB
Time
~ 65 s
~ 80–90 s
~ 130–140 s
31
Tabla de contenido

Solución de problemas

loading

Tabla de contenido