BALAY 3XM202H Instrucciones De Uso página 58

Instructions for Use
a
b
c
d
Fig. 12
• The accessory has two holes on the side
to fit it to the window / balcony with. The
user can secure it to the frame or wall
with two screws (not included with the
accessory) to prevent it from moving or
falling out of place, Fig. 13.
Fig. 13
Permanent installation
Performed using the wall grommet /
window grommet accessory. See
"Description of accessories".
• To expel hot air through the wall, it is
necessary to make a hole in the wall and fit
the wall grommet, Fig. 14.
Fig. 14
24 - 38 cm.
• Remove the diffusion sleeve and connect
the air expulsion tube to the accessory.
• If permanent installation is to be
performed through the window, then it is
only necessary to use the transparent
end piece on the accessory. A 10.5-cm
diameter hole needs to be cut in the
glass, Fig. 15.
Fig. 15
Notes:
Do not extend the hot air expulsion
tube more than necessary (maximum
length; 140 cm).
Do not form sharp bends when
positioning the tube, otherwise the Do
not form sharp bends when positioning
the tube, otherwise the correct
expulsion of hot air may be impeded.
This may cause a reduction in the
cooling power and performance of the
appliance.
59