Instructions For Use; Preparing The Appliance Before Use - BALAY 3XM202H Instrucciones De Uso

Instructions for Use

Preparing the appliance before
use
Installing the air expulsion tuben
• Fit the air expulsion tube assembly into
the housing on the top of the appliance
at the back, Fig. 7.
Fig. 6 Fig. 7
In order to fit the expulsion tube assembly
properly in its housing, it is necessary to
slide the sleeve into the positioning slot (as
shown by the arrows on Fig. 8).
Fig. 8
The diffusion duct, Fig. 6, is added when
the tube assembly has been fitted onto the
appliance.
Press the "Push" ab (Fig. 9, 1.) and slide
out (Fig. 9, 2.) to remove the assembly
from the appliance.
Fig. 9
Hueco para la ubicación
del conjunto tubo
expulsor de aire
Installation for the dehumidification and
air purification function
• Remove the diffusion duct and set the
air expulsion tube to the position shown
in figure 10.
• The expulsion tube may also be totally
dismantled if desired.
Fig. 10
Installing the air expulsion accessories
for the air-conditioning function
There are a set of accessories used to
expel hot air (see "Description of
accessories").
Installing the suction pad
• Open the window slightly and position
the diffusion duct between the jamb and
the glaze frame.
• Close the window as far as possible and
secure it with the suction pad supplied,
Fig. 11.
Fig. 11
Installing the sliding window / balcony
accessory
• The sliding window/balcony installation
accessory supplied with your appliance
can also be used (See "Description of
accessories"), Fig. 12 : a, b, c, d. This
accessory can be used for both
horizontal and vertical windows.
58