Requirements For Use; Navigation; Up And Down Keys - BALAY 3XM202H Instrucciones De Uso

Requirements for use

Requirements for use
• This home appliance should be
connected to a 220/240 V, 50 Hz mains
electricity supply via an earthed socket.
• It must be protected with a 10 A slow-
action fuse.
• Should an extension lead be required,
then this lead should be at least 1.5 mm
thick per terminal, less than 25 m long
and earthed.
• There is a cavity at the back of the
appliance to house the mains electricity
supply cable. See Fig. 2.
• Do not allow water to enter your
appliance and do not cover the air
intakes/outlets.
• For safety reasons, the appliance must
be at least 20 cm away from any nearby
surface before it is turned on, Fig. 5.

Navigation

The control panel is designed to make it
easier to use your appliance. The following
points need to be taken into consideration.
The "up" and "down" keys are used to
move up and down the screen. The "+"
and "–" keys (right and left) are used to
move to the right and to the left in the
selection box. The box shows the function
selected for modification.
The following is an example of navigation:
mín.
20 cm.
Fig. 5
2
Warning!
The mains electricity supply connection
cable must only be replaced by
authorised members of the
manufacturer's Official Technical
Service.
When the appliance is turned off and
then turned back on, it takes the
compressor 3 minutes to start up again.
This period of time is required in order
to ensure correct operation.
Avoid direct contact with the air
expelled through the expulsion tube.

Up and down keys

The "up" and "down" keys are used to
move up and down the screen.
"Down" key
Starting from the screen shown in the first
figure (the selection box is situated on the
operation function option). If you press key
, the selection box moves down to the
"Temperature selection" function.
56
mín.
20 cm.
: