BALAY 3XM202H Instrucciones De Uso página 67

Cleaning and Maintenance
be opened up to the safety stop without
risk of falling.
Fig. 18
All models are fitted with a basic filter
which needs to be cleaned regularly,
Fig. 19. The filter is accessed by pressing
the tab at the top and removing it from its
housing, Fig. 20. The filter is cleaned
under a cold tap, dried and replaced.
Washable
basic filter
Fig. 19
Fig. 20
A double active filter is also fitted inside
the basic filter on these models, Fig. 21.
Double active
filter
Fig. 21
In order to remain operational, this filter
needs to be changed every year or when
the "change filter" symbol
the screen.
((These accessories are available for
purchase from the Manufacturer's Official
Technical Service and authorised
distributors).
Press the "+" and the "–" key at the same
time to make the symbol
from the screen after changing the filter.
The symbol disappears from the screen
and the filter is operational again.
Installing the double active filter:
• Remove the basic filter from the
appliance, Fig. 20.
• Change the double active filter inside the
basic filter for a new one as shown in
Fig. 21.
• Install the assembly onto the appliance
by lining the lower studs up with the
slots on the front casing of the appliance
and pressing the top " clip" in until it
clicks into position. The assembly is
fitted properly when it clicks into
position.
• Close the front flap.
• In order to maintain cooling power, only
fit one set of filters onto the support.
Note:
The flaps on these models are fitted
with safety stops up to which point they
can be opened without risk of the front
flap falling and causing damage and/or
injury.
68
appears on
disappear