Pulsar HELION 2 XP50 PRO Guia De Inicio Rapido página 5

Buttons Operation
Button Device Status
Button Device
ON/OFF switched off
Display off
Device on
Navi- Normal
gation (observation)
button
Main menu
UP
Quick Access
menu
MENU Normal
button
(observation)
Main menu
Quick Access
menu
Navi- Normal
gation (observation)
button
Main menu
DOWN
Quick Access
menu
Record Video
button
REC
Photo
Battery pack charging
Lift up the lever (7) of the charger.
•
Install the Battery Pack (5) into the charger as far as it can go.
•
Lower the lever (7).
•
Connect the micro USB plug of the USB cable (8) to the micro USB port (9) of
•
the charger.
Connect the other end of the microUSB cable to the mains adapter (10).
•
Plug the mains adapter (10) into a 100 - 240 V socket (11).
•
• Disconnect the charger from the mains after the battery is fully charged
(green LED light stays on continuously).
First Next
short press short press
Turning on Sensor
device calibration
Turning on Sensor
display calibration
Sensor calibration
Toggle observation modes
Navigate upwards/ rightwards
Parameter change
Enter the quick ---
access menu
Confirm selection
Switching between quick
access menu items
Discrete zoom adjustment
Navigation downwards/
leftwards
Parameter change
Start video Pause/
recording resume video
recording
Photography
Long
press
Switch display
off/ Switch
device off
Switching color
palettes
---
---
Access main
menu
Exit submenu
without
confirming
selection/ exit
the menu (go
to observation
mode)
Switch PiP on/
off
---
---
Video recording
off/Switch to
video mode
Switch to video
mode
ENGLISH
2