Canopy Assembly - Craftmade Pireos Guia De Instalacion

7. Canopy Assembly.

Locate 2 screws on underside of hanging bracket
and remove screw closest to the open end of the
hanging bracket. Partially loosen the other screw.
Lift canopy to hanging bracket. Place rounded part
of slotted hole in canopy over loosened screw in antenna
hanging bracket
hanging bracket and push up. Twist canopy to
lock. Re-insert screw that was removed and then
screw
tighten both screws securely.
canopy
Slide canopy cover up to canopy. Press up gently
but firmly on canopy cover until you hear it snap
screw
onto the bottom of the canopy.
canopy cover
*Remember that antenna for remote control
receiver must rest outside of hanging bracket.
page 7