Handling - Sunrise Medical Breezy 100 Manual Del Usuario

Fig.13
4. The attachment points to the chair are the inner front side frame just above the castor and the rear side frame. The
straps are fitted around the side frames at the intersection of the horizontal and vertical frame tubes. (See Figs
15-20)
5. The tie down symbol (Fig 16) on the wheelchair frame indicates the position of the wheelchair restraint straps. The
straps are then tensioned after the front straps have been fitted to secure the wheelchair.
Transportability – positioning of wheelchair tie down restraints on wheelchair .
Fig. 15
The wheelchair secured with front and rear wheelchair tie down restraints.
Positioning of the restraint straps is shown in more detail below.
Fig. 17
Position of the front wheelchair tie down restraint and the tie down label.
Fig. 19
Position of the rear wheelchair tie down restraint and the tie down label on the wheelchair.
c. HANDLING
1. Opening: Rest both hands on each of the seat upholstery support rails and press down until the seat and back
upholsteries become taut. Lower the footplates into the using position. As a safety measure, the footplates will always
be in an upright position before sitting or getting out of the chair in a forward movement. Warning: Before sitting down
ensure that the seat rails are properly housed in the front structure supports. Warning: Do not place your fingers
between the seat upholstery and the seat tubes when opening or folding the wheelchair. Never open the chair
by pushing on the push hands.
16
Fig. 14
Fig. 16 Tie down label
Fig. 18
Fig. 20