Makita HR2800 Manual De Instrucciones página 5

Changing the quick change chuck for
SDS-plus
For model HR2810T, HR2811FT
The quick change chuck for SDS-plus can be easily
exchanged for the quick change drill chuck.
Removing the quick change chuck for SDS-plus
1
3
2
008233
CAUTION:
Before removing the quick change chuck for
•
SDS-plus, always remove the bit.
Grasp the change cover of the quick change chuck for
SDS-plus and turn in the direction of the arrow until the
change cover line moves from the
symbol. Pull forcefully in the direction of the arrow.
Attaching the quick change drill chuck
1
2
3
008234
Check the line of the quick change drill chuck shows the
symbol. Grasp the change cover of the quick change
drill chuck and set the line to the
Place the quick change drill chuck on the spindle of the
tool.
Grasp the change cover of the quick change drill chuck
and turn the change cover line to the
click can clearly be heard.
1. Quick change
chuck for
SDS-plus
2. Change cover
line
3. Change cover
symbol to the
1. Spindle
2. Quick change
drill chuck
3. Change cover
line
4. Change cover
4
symbol.
symbol until a
Selecting the action mode
For Model HR2800
008236
This tool employs an action mode changing knob. Select
one of the two modes suitable for your work needs by
using this knob.
For rotation only, turn the knob so that the arrow on the
knob points toward the
For rotation with hammering, turn the knob so that the
arrow on the knob points toward the
body.
CAUTION:
Always set the knob fully to your desired mode
•
symbol. If you operate the tool with the knob
positioned halfway between the mode symbols, the
tool may be damaged.
Use the knob after the tool comes to a complete
•
stop.
For models HR2810, HR2810T, HR2811F, HR2811FT
Rotation with hammering
008206
For drilling in concrete, masonry, etc., rotate the action
mode changing knob to the
tungsten-carbide tipped bit.
Rotation only
008207
5
1. Action mode
changing knob
1
symbol on the tool body.
symbol on the tool
1. Action mode
changing knob
1
symbol. Use a
1. Action mode
changing knob
1