Installing The Ceiling Cover - Luminance Brands Kathy Ireland Home PRO II LED Serie El Manual Del Propietario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

9.1
Remove the Left Screw and Lockwasher from each
side of the Hanger Bracket (Figure 20) and Loosen the
other Two Screws .
NOTE: When installing the ceiling fan using the
close-to-the-ceiling method, carefully lift the fan
assembly from the hook on the hanger bracket and
proceed as follows.
9.2
Lift the Ceiling Cover up to the Hanger Bracket .
Engage the Slots in the Ceiling Cover with the
Loosened Screws in the Bracket and turn the Cover
Counterclockwise (Figure 21) .
Be sure that the Lockwashers are between the Screw
Heads and the Ceiling Cover .
Install the other Two Screws and Lockwashers; tighten
all Screws securely .
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box
and not pinched between the ceiling cover and the
ceiling.

9. Installing the Ceiling Cover

Hanger Ball/Downrod Assembly Shown
Figure 20
Figure 21
Please contact 1-800-777-4440 for further assistance
15
REMOVE LEFT
SCREW AND
LOCKWASHER
ON EACH SIDE
LOOSEN THE RIGHT
SCREW/LOCKWASHER
ON EACH SIDE
luminancebrands.com
U.L. Model No.: 42-ANT & 52-ANT
Tabla de contenido
loading

Tabla de contenido