Installation; Generator Installation On Achimney Level - Palazzetti INSERIMENTO A70 Manual De Instalación, Uso Y Mantenimiento

6 INSTALLATION

The stove can be installed with air distribution at
the front or channelled on the level of a chimney
with or without optional frame.
6.1 GENERATOR INSTALLATION ON A
CHIMNEY LEVEL.
In the event of installation in structures with marble
cladding or other materials, the stove has sliding
guides to assist with extracting the equipment for
attaching to the fixing surface and for carrying out
inspections and checks on the mechanical and
electrical components.
6.1.1 POSITIONING THE GENERATOR WITHOUT
PEDESTAL
1. The lower part of the supporting base must always
be free to allow for the passage of air to the stove
and cooling air inside the cladding.
2. Insert the cold handle supplied into the door closing
lever mechanism Fig. 6.1.0. on receipt of the
machine, with it still fixed to the pallet.
3. Open the door (fig. 6.1.1);
4. Insert the Allen key (A) into position in the lock release
mechanism; press and turn the locking lever counter-
clockwise to position (B) (Fig. 6.1.2), close the door
and pull the machine outwards until it reaches the
end of the guides (Fig. 6.1.3a).
This operation trips a safety micro-switch (W) that
deactivates electrical power. (Fig. 6.1.3b) the power
cable must not be connected to mains power.
.
INSTALLATION
1
Fig. 6.1.3a
00 4776070 - 17/12/2018 - PN - Italy
2
B
A
Fig. 6.1.0
Fig. 6.1.1
Fig. 6.1.2
W
Fig. 6.1.3b
33