Tabla de contenido
Idiomas disponibles
Idiomas disponibles
the box below the switch (4A fuse). During the periods of inactivity, we recommend you disconnect the
power cord of the stove.
Rev.1 09.02.18
What to check befor turning on the stove
Make sure you have removed all parts that pose the risk of burns from the combustion chamber or glass (various instructions or
Pag.62
EN
stickers).
NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
Before turning on the stove, make sure you have fitted the grate on the support base and check that the door and the ash drawer
are properly close.
COMPLYING WITH THE SPECIFICATIONS BELOW
Testing and commissioning
How to load the pellets
Stove start-up must be preceded by testing, which includes an operational check of the following elements:
Fuel supply consists in the insertion of pellets from the top of the stove, by opening the door. During pellet loading prevent the pel-
•
connection to the smoke evacuation system;
let bag from coming into contact with hot surfaces.
•
checking that all materials used to build the smoke duct, chimney and chimney pot are regulation and suitable for use.
The testing is positive only when all operational phases have been completed without any anomaly being detected.
NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
COMPLYING WITH THE SPECIFICATIONS BELOW
Controls and use
Description of the handheld set:
Description of the handheld set:
The handheld set is shown in the picture below:
The handheld set is shown in the picture below:
1
2
1
3
2
3
The information below will allow you to become familiar with the product and achieve the best performance.
The information below will allow you to become familiar with the product and achieve the best performance.
How to insert the batteries in the handheld set:
How to insert the batteries in the handheld set:
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries (mini
(mini pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover
pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover as shown
as shown in figure B
in figure B
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
Figure A
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
Select the desired language using the scroll keys and confirm your selection with the confirmation button.
Select the desired language using the scroll keys and confirm your selection with the confirmation button.
Use and maintenance manual Classic 11
1
4
2
4
5
3
4
5
6
5
4
6
6
5
6
Figure A
Figure A
ITALIANO
DEUTSCH
ENGLISH
FRANCAIS
DANSK
NEDERLANDS
ESPANIOL
Increase button "UP" (selection key)
Decrease key "DOWN" (selection key)
1
Increase button "UP" (selection key)
ON/OFF or reset from "Sleep" mode key.
2
Decrease key "DOWN" (selection key)
Display
3
ON/OFF or reset from "Sleep" mode key.
Key for accessing the MENU and back
1
Increase button "UP" (selection key)
4
Display
Confirmation key
2
Decrease key "DOWN" (selection key)
5
Key for accessing the MENU and back
3
ON/OFF or reset from "Sleep" mode key.
6
Confirmation key
4
Display
In "Sleep" mode, the handheld set
screen is obscured, keeping however
5
Key for accessing the MENU and back
In "Sleep" mode, the handheld set
active the radio communication with
6
Confirmation key
screen is obscured, keeping however
the stove to reduce battery con-
active the radio communication with
In "Sleep" mode, the handheld set
sumption.
screen is obscured, keeping however
the stove to reduce battery con-
active the radio communication with
sumption.
the stove to reduce battery con-
sumption.
Figure B
Figure B
Figure B
Capítulos
Tabla de contenido
