Luminance Brands Kathy Ireland Home EUCLID CF500AP00 El Manual Del Propietario página 7

3. Ceiling Fan Assembly
3.5
Carefully turn the partially assembled Fan right side up
and place on the styrofoam carton .
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the Downrod (Figure 5) .
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 5) .
Retain the Pin and Hanger Ball for reinstallation in
Step 3 .11 .
NOTE: Do not loosen the Screw holding the Green
Ground Wire.
3.6
Separate, untwist and unkink the Three 80" Motor
Wires .
Route the Three 80" Black, Blue, and White Motor
Wires through the Downrod (Figure 6) .
3.7
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 7) .
Seat the Downrod in the Motor Coupler (Figure 7) .
Rotate and align the Downrod Holes with all the Holes
in the Motor Coupler (Figure 7) .
(Continued)
PIN
GREEN GROUND WIRE SCREW
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 5
THREE 80" MOTOR
WIRES (UNTWISTED)
Figure 6
LOOSEN
PHILLIPS HEAD
SET SCREWS (2)
Figure 7
7
GREEN GROUND WIRE
4.5" DOWNROD
HANGER BALL
4.5" DOWNROD
4.5"
DOWNROD
MOTOR
MOTOR
COUPLING
COUPLER
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF500