Install Filters - Best WC46 Manual Del Usuario

INSTALL FILTERS

DUCTED AND NON-DUCTED HOODS
1. Open the metal panel (Fig.22).
2. To remove the GREASE filter, push in
latch tab to disengage the filter from the
hood. Tilt the filter downward and remove
(Fig.23).
3. To install the GREASE filter, align rear filter
tabs with slots in the hood. Push latch tab
in, push filter into position and release.
Make sure the filter is securely engaged
after installation.
NOTE: prior to use, remove protective film
from the filter frame.
NON-DUCTED HOODS ONLY
1. To install the CHARCOAL filter, position
the charcoal panel inside the metal filter
and fit the 2 filter retainers to lock the
charcoal filter (Fig.24).
- 17 -
FIG. 22
FIG. 23
FIG. 24