Outdoor Leisure TD101A Manual Del Usuario página 7

13. Attach grate assembly to burner support
plate using 3 screws, (C) one through bot-
tom of each deco grate pillar (see Figure
7, page 6).
14. Position 3 top support pillars over pillar
support connectors. Secure each set with
1 screw (C) each (see Figure 8).
15. Place deflector over top support pillars
and deco grate pillars. Attach deflector to
deco grate pillars with 3 screws (C). See
Figure 8.
Deco
Grate
Pillar
Figure 8 - Deflector and Top Support
Pillar Assembly
1393-01A
ASSEMBLy
Continued
16. Lay table top upside down on a blanket
or piece of cardboard to prevent scratch-
ing. Attach 3 brackets with 9 self tapping
screws (F) as shown in Figure 9.
17. Turn table top right side up. Slide brackets
into top support pillars. Attach with 1 screw
(D) each through support pillar and into
bracket (see Figure 10).
Table Top
Screw (C)
Deflector
Top
Support
Pillar
Pillar
Support
Connector
Screw (C)
Screw (D)
Figure 10 - Table Top Installation
www.desatech.com
Screw (F)
Figure 9 - Table Top Assembly
Bracket
Table Top
Slide
Brackets
Inside
Support
Pillars
Support
Pillar
7