Security - Nokia Supernova 7610 Manual Del Usuario

Software update settings
This option may not be available, depending on your phone.
To allow or disallow software and configuration updates, select Menu > Settings >
Configuration > Device manager sett. > Serv. softw. updates.
Request a software update
1. Select Menu > Settings > Phone > Phone updates to request available software
updates from your service provider.
2. Select Current softw. details to display the current software version and check
whether an update is needed.
3. Select Downl. phone softw. to download and install a software update. Follow the
instructions on the display.
4. If the installation was canceled after the download, select Install softw. update
to start the installation.
The software update may take several minutes. If there are problems with the
installation, contact your service provider.

Security

When security features that restrict calls are in use (such as call restriction, closed user
group, and fixed dialing), calls may be possible to the official emergency number
programmed into your device.
Select Menu > Settings > Security and from the following options:
● PIN code request or UPIN code request — to request for your PIN or UPIN code
every time the phone is switched on. Some SIM cards do not allow the code request
to be turned off.
● PIN2 code request — to select whether the PIN2 code is required when using a
specific phone feature which is protected by the PIN2 code. Some SIM cards do not
allow the code request to be turned off.
● Call restriction — to restrict incoming calls to and outgoing calls from your
phone (network service). A restriction password is required.
● Fixed dialing — to restrict your outgoing calls to selected phone numbers if
supported by your SIM card. When the fixed dialing is on, GPRS connections are not
possible except while sending text messages over a GPRS connection. In this case,
the recipient's phone number and the message center number must be included in
the fixed dialing list.
● Closed user group — to specify a group of people whom you can call and who can
call you (network service)
● Security level — Select Phone to request the security code whenever a new SIM
card is inserted into the phone. Select Memory, to request the security code when
the SIM card memory is selected, and you want to change the memory in use.
● Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or
restriction password
● Code in use — to select whether the PIN code or UPIN code should be active
36 © 2008 Nokia. All rights reserved.