Before Use - Mellerware AQUILLO BREEZE 35850 Manual Del Usuario

2.2.2. Do not touch the rotating parts of the appliance,
as it may cause serious injury.
2.2.3. This appliance is only for domestic use, not for
industrial or professional use. It is not intended to be
used by guests in hospitality environments such as
bed and breakfast, hotels, motels, and other types of
residential environments, even in farm houses, areas
environments.
2.2.4. This appliance is not intended for use by
persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by
a person responsible for their safety.
2.2.5. This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
2.3. Use and care:
2.3.1. Fully unroll the appliance's power cable before
each use.
2.3.2. Do not use the appliance if the parts or acces-
2.3.3. Do not turn the appliance over while it is in use
or connected to the mains power supply.
2.3.4. Unplug the appliance from the mains power
supply when not in use and before undertaking any
cleaning task.
2.3.5. This appliance should be stored out of reach
of children.
2.3.6. Do not store the appliance if it is still hot.
2.3.7. Never leave the appliance unattended when in
use and keep out of the reach of children.
2.3.8. If for some reason, the appliance were to catch
supply and DO NOT USE WATER TO PUT THE FIRE
OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only
spare parts or accessories are used to replace existing
parts/accessories.
2.4.2. If the power cord is damaged, the manufacturer
replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instructions
for use renders the guarantee and the manufacturer's
liability null and void.
3. Instructions for use

3.1. Before use:

plicable).
in the manner described in the cleaning section.
3.2. Assembly:
3.2.1. Fit the pole onto the base and secure correctly
using the screws supplied.
3.2.2. Fit the rear grille and secure with the plastic sup-
port nut. Make sure that the handle faces upwards and
the plastic pins are aligned to the corresponding holes
on the rear grille for perfect coupling.
3.2.3. Fit the fan propeller and secure with blade sup-
port nut. Ensure that the drive pin that goes through the
propeller.
3.2.4. Insert the front grille through the top of the rear
grille. Fit the rear grille clips onto the front grille. Check
that the grille safety screw holes are aligned at the
bottom of the grille. Secure and tighten the grille safety
screw.
3.3. Use and care:
3.3.1. Turning the fan on:
3.3.1.1. Connect the appliance to the mains.
0. Stop fan
3.3.2. Swing and tilt
3.3.2.1.The fan head can swing from right to left,
sweeping air from a certain area. To do so, simply
press the swing control.
3.3.2.2. To set the fan head, pull the swing control and
turn the head to the required position.
3.3.2.3. To tilt the fan head, loosen the tilt adjust lock nut by
holding onto the grille and motor casing with both
hands and resetting it to the required position.
3.3.2.4. The control N can be used to adjust the height.
3.4.1. Allow fan blade to come to a complete stop.
3.4.2. Unplug the appliance from the mains power
supply.
-