Installing Your Pet Door; Determine Pet Door Location; Prepare Door - Petsafe Freedom PPA00-10859 Manual De Instalación

Installing Your Pet Door

Step 1

Determine Pet Door Location

1A. Measure and mark your pet's shoulder height on the door.
1B. Determine location for the pet door. Draw a vertical center line
through the shoulder height line using a level.
NOTE: If homeowner's door or other application is not level,
the pet door must be marked level to swing properly.
Step 2

Prepare Door

2A. Remove door from hinges.
2B. Place on a raised level surface such as saw horses.
Helpful Tip: Clamp or weigh down the door to prevent it
from moving.
NOTE: The Pet Door can be installed with the door
hanging based on your skill level.
2C. Cut out the correct template size. Match the marked
lines on the door with the shoulder and center lines on
the template. Tape the template in place and carefully
trace template. Make sure to trace underneath tape and
connect the corners. Now, remove the template and any
excess tape from the door.
When applying template there should
be a minimum of 3" between the bottom
and sides of the door and the outer
edge of the template to maintain the
structural integrity of the door.
www.petsafe.net
1A
1B
2A
2C
2B
5