Fulcrum SPEED 40T Manual Del Usuario página 24

Note
We recommend that you contact a specialized mechanic for all the assembly, disassembly and all hub, rim and spoke replacement operations. Choose
with him the most suitable interval of inspections for you on the basis of the conditions of use and intensity of your activities (e.g. racing, rain, salted
roads, muddy roads, cyclist's weight, etc.).
• If the hub bearings are CULT (in Cronitect
to have the hub bearings and the balls lubricated with specific oil for bearings.
• If the hub bearings are USB or Standard, periodically take the bicycle to a specialised mechanic to have the hub bearings and the balls lubricated with
specific grease for bearings.
• Ensure that the tyres are in good condition and check the inflating pressure before every ride.
WARNING!
Incorrect tire pressure could cause tire failure or loss of control of the bicycle, resulting in an accident, personal injury or death.
Note
The tire pressure should also be adjusted depending on the weight of the rider; a heavy rider should have a greater tire pressure than a light rider.
• Keep the braking surface of the rim and the brake pads free from oil and grease.
• At the end of the lubrication operations, CAREFULLY degrease the braking rim and the brake blocks.
• To maintain the brake pads are in efficient working order and to avoid wear on the sides of the rims, you should remove with a file any residue of sand,
debris or foreign objects which may become embedded in the brake pads, especially during use in the rain.
• Periodically check the state of wear of the brake blocks and replace them when the braking surface approaches the end of the groove marked "WEAR
LIMIT", or in the case of inadequate braking performance.
• Never make any modifications whatsoever to any component of any Fulcrum product.
• Parts which have been bent or otherwise damaged in an accident or as a result of any other impact must not be re-straightened. They must be replaced
immediately with original Fulcrum parts.
• After using the wheel for the first time, check wheel trueness and circularity.
WARNING!
Using wheels that have not been centred properly or which have broken or damaged spokes may result in accidents, personal injury or death.
, advanced solution by FAG and the balls in ceramic), periodically take the bicycle to a specialised mechanic
®
®
11