Tabla de contenido
6-3-3-4 Camera Check
1.
Select 'CAMERA CHECK' from the I/O Test Screen. The following
screen is displayed:-
CAMERA CHECK [DEFAULT IN GREEN]
IRIS ADJUST
TINT ADJUST
V POSITION
H POSITION
EXIT
TAKE A PHOTO AND RELEASE
SELECT SW : CHOOSE ENTER SW : ENTER
•
In the CAMERA CHECK Screen, the current view of the camera is
displayed in the centre box.
(a) MIRROR/PHOTO
By pressing the Brake Pedal or Service Switch, the image from the
camera is frozen on the screen and the word MIRROR, just below the
image box, changes to PHOTO. This is the mage that would be used
during the game.
Pressing the Brake Pedal or Service Switch again reverts back to
current camera image, and the word PHOTO changes to MIRROR.
The mode of [MIRROR] is used for adjustment of the image, and the
mode of [PHOTO] to verify the picture to be used during the game.
(b) IRIS ADJUST
This setting is used to adjust the brightness of the image.
The brightness of the image is automatically adjusted to the optimum
value by the system, but this item allows the brightness level to be
set manually.
Select this item and press the ENTER button. Use the Select UP/
DOWN switch to make the image brighter or darker. There are three
brighter and three darker settings available.
Press the ENTER button to store the new setting and to exit this
mode.
I/O TEST
MIRROR
D
G
+000
+000
: BRAKE OR SERVICE SW
Page 51
............................................ (a)
B .................................. (b)
R .................................. (c)
..................................... (d)
..................................... (e)
Tabla de contenido
