Seat; Adjusting The Headlight Beams; Adjusting The Shock Absorber Assembly - Benelli 752S Manual Del Propietário

Seat

To remove the seat
1. lnsert the key and turn it counter
clockwise to open the saddle.
2. Lift and remove the saddle.
To install the seat
1. Insert the saddle and press down gently
on the back to close it.

Adjusting the headlight beams

The headlight beam adjusting screw is
used to raise or lower the height of the
headlight beams. It may be necessary to
adjust the headlight beams to increase
visibility and help prevent blinding onco-
ming drivers when carrying more or less
load than usual.
Obey local laws and regulations when
adjusting the headlights.
To raise the headlight beams, turn the
screw in direction (A).
To lower the headlight beams, turn the
screw in direction (B).
A
B
3 - 15
Instrument and control functions
Adjusting the shock absorber
assembly
Spring pre-load adjustment.
The rear shock absorber is equipped with
adjustment ring nuts for preload adjust-
ment.
Adjust the spring preload as follows:
To increase the preload setting of the
spring, turn the adjustment ring nut with
special wrench , to make the suspension
stier.
Please rotate opposite direction to achie-
ve a softer setting.
After adjustment, please make sure the
lock nut tightened to ensure safety of ri-
ding.
EN
3