Parker Hiross Hyperchill-Plus ICEP040 Manual De Uso página 151

7.3 Techincal data
MODBUS
unit adress
BaudRate 9600
Protocol Parity
Address Display label App type Default
8964 Set INT 13(55,4)
8965 dIF1 INT 4(7,2)
8966 dIF2 INT 0,3(0,5)
8969 OFFC INT 2(3,6)
8970 ONC INT 1(1,8)
8973 LiS INT 5(41)
8974 HA1 INT 60(140)
8975 LA1 INT -40(-40)
8976 db1 INT 1(1,8)
8977 HA2 INT 60(140)
8978 LA2 INT 2,5(36,5)
8979 dI2 INT 4(7,2)
8980 HA3 INT 60(140)
8981 LA3 INT -30(-22)
8982 SEA INT 19(66,2)
8983 dIA INT 1(1,8)
8984 ArA INT 5(41)
8985 DtHA INT 5(9)
8986 SRQH INT 30(86)
8987 drq INT 19(34,2)
8988 SrC INT 15(59)
8989 drC INT 2(36)
8990 SRQL INT 5(41)
8995 PStA INT 0
8996 SUP BOOL FALSE
16385 rE USINT 0
16387 SUP BOOL FALSE(0)
16384 C-F BOOL FALSE(0)
16386 rAL USINT 0
16388 Ud4E BOOL FALSE(0)
16390 ASt BOOL TRUE(1)
16391 r0n UINT 6
16465 CPT BOOL FALSE(0)
16445 Erd BOOL FALSE(0)
8999 Dma INT 25(77)
8961 dMin INT 15(59)
16423 dAS USINT 5
16431 tH1 INT 0
16472 tH1L INT 0
16409 CHA1 BOOL TRUE(1)
16414 CHA2 BOOL TRUE(1)
16411 CLA1 BOOL FALSE(0)
16419 rLa USINT 5
16420 tLa USINT 60
16432 AbPd BOOL TRUE(1)
16433 dPOn USINT 15
1 EVEN
NONE
1 ODD
Min Max Unit
LIS 65(149) °C/(°F)
0,3(0,5) 10(18) °C/(°F)
0,3(0,5) 10(18) °C/(°F)
ONC 10(18) °C/(°F)
0(0) OFFC °C/(°F)
LA2 65(149) °C/(°F)
-40(-40) 65(149) °C/(°F)
-40(-40) 65(149) °C/(°F)
1(1,8) 10(18) °C/(°F)
-40(-40) 65(149) °C/(°F)
-40(-40) 65(149) °C/(°F)
1(1,8) 10(18) °C/(°F)
-40(-40) 65(149) °C/(°F)
-30(-22) 65(149) °C/(°F)
LIS 65(149) °C/(°F)
1(1,8) 10(18) °C/(°F)
-30(-22) 65(149) °C/(°F)
0(0) 30(54) °C/(°F)
-10(14) 55(131) °C/(°F)
0(0) 30(54) °C/(°F)
-30(-22) 50(122) °C/(°F)
0(0) 10(18) °C/(°F)
-10(14) 30(86) °C/(°F)
0 1
FALSE TRUE
0 2
FALSE(0) TRUE(1)
FALSE(0) TRUE(1)
0 2
FALSE(0) TRUE(1)
FALSE(0) TRUE(1)
0 300 sec
FALSE(0) TRUE(1)
FALSE(0) TRUE(1)
0(32) 37(98,6) °C/(°F)
-20(-40) 37(98,6) °C/(°F)
0 10 Minutes
0 9999 KHours
0 9999 Hours
FALSE(0) TRUE(1)
FALSE(0) TRUE(1)
FALSE(0) TRUE(1)
0 15 n°
5 60 Minutes
FALSE(0) TRUE(1)
dLE 60 Sec
ICEP040-060
Not configurable
Stop Bit
Data Bit
Address with offset 40000 (es: 8964+40000=48964)
Read Only Note
FALSE Set point
FALSE Differential 1 for thermostating
FALSE Differential 2 for thermostating
FALSE Differential for compressor OFF
FALSE Dirrerential for compressor ON
FALSE Set point lower limit
FALSE B1 High terperature alarm
FALSE B1 Low temperature alarm
FALSE B1 Low level temperature alarm retrigger
FALSE B2 High temperature alarm
FALSE B2 Low temperature alarm
FALSE B2 Alarm differential
FALSE B3High temperature alarm
FALSE B3 Low temperature alarm
FALSE Set point (B1) antifreeze
FALSE Thermostating differential (B1)
FALSE Set point activation (B3)
FALSE Differential for dipendent water exit regulation
FALSE SetH point for control panel heater
FALSE Differential control panel heater
FALSE Setpoint Carter Heater
FALSE Differential value for carter heater
FALSE SetL point for control panel resistor
TRUE Status ON/OFF dryer
FALSE Supervisor ON OFF request (to change the state machine - change True from "0" to "1")
FALSE Remote ON/OFF enable
FALSE ON/OFF enable from supervison
FALSE Unit of measure (FALSE=°C, TRUE=°F)
FALSE Alarm relè management
FALSE Enable antifreeze resistor 0=disabled
FALSE Autostart enable 0=NO 1=YES
FALSE Main power supply return
FALSE CPT control 1=Enable
FALSE Enable managing water with Ambient temperature
FALSE Max value to stop compressor in ERD
FALSE Min value to run compressor in ERD
FALSE Minimun time between two switch ON of the same compressor (minutes)
FALSE Compressor 1 working hours warning threshold (x1000)
FALSE Compressor 1 working hours warning threshold
FALSE HA1 alarm management
FALSE HA2 alarm management 0=Warning; 1=Alarm; 2=System
FALSE LA1 alarm management
FALSE Max number of Events LA2 Alarm
FALSE Interval Time LA2 Alarm
FALSE Enable delay switching on pump
FALSE Delay switching ON pump (sec) at power on
10