Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5-1
Fitting the Header Assembly
The Header Assembly has a forward centre of gravity, so it is important that at least
two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is very high, and it is important that a
means of reaching the height safely, without stretching, is available. (e.g. steps, step
stool etc.)
1.
Place the header on to the monitor cabinet and slide it forwards so that it en-
gages under the fixing brackets at the front.
2.
Remove 2off pozi hed screws (M5x10), and remove the Connector Cover.
3.
Retain the header in position with 2off pozi head screws (M6x30).
4.
Connect the connector.
5.
Fit the Header Pop-Up using the supplied 4off pozi head screws (M5x16).
Page 35
Tabla de contenido
