Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8-2-3
Replacing the Steering Control Pot
1)
Remove three security screws (M5x16) and four security screws (M5x12)
from the right hand bike vac-form, and remove the vac-form.
2)
Slacken the grub screw (M4x5) to release the control pot shaft.
3)
Replace the control pot, ensuring that the pot is replaced in the same
position and the wires are fitted to the correct terminals.
4)
Re-tighten the grub screw (M4x5), ensuring that it engages the flat of the
control pot shaft.
5)
Refit the bike vac-form, and the security screws (M5x12) (M5x16).
Page 55
Tabla de contenido
