I/O Test - NAMCO 500 GP Std Manual Del Operador

6-3-3

I/O Test

1. Select "I/O TEST" on the menu screen to test the switches. The following
screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Press the Enter button and the Select Up switch together after testing to
return to the MENU Screen.
DIP 4
I/O PCB CHECK
HOW TO [I/F INITIALIZE]
SWITCH TEST
MOTOR TEST
EXIT
ENTER :
(a) Shows the condition of the DIP switches on the PCB. In normal operation all
switches are OFF. (If a switch is ON, its number will be displayed in red).
(b) Checks if Game PCBs are communicating when games are linked.
If the communication is good LINK ON # will be displayed.(# is the number
of linked games)
If the communication is wrong LINK OFF will be displayed.
If unreconisable data is being received LINK NG will be dispalyed.
(c) Checks the function of the I/OP PCB
(d) Describes how to Initialize the Game.
(e) Used to test all switches.
(f) This item is not used on this game.
I/O TEST
12345678 [0N:RED] ................................ (a)
LINK OFF ............................................... (b)
................................................................ (c)
................................................................ (d)
................................................................ (e)
................................................................ (f)
CHOOSE :
(see section 6-3-3-1 page 44)
Page 43