Sony DSX-A410BT Manual De Instrucciones página 30

For BLUETOOTH function:
BTA NO DEV: The BLUETOOTH device is not
connected or recognized.
 Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
ERROR: The selected operation could not be
performed.
 Wait for a while, then try again.
UNKNOWN: A name or phone number cannot be
displayed.
WITHHELD: The phone number is hidden by the
caller.
For Sony | Music Center operation:
APP ––––––––: A connection with the application is
not established.
 Make the "Sony | Music Center" connection again
(page 17).
APP DISCNCT: The application is disconnected.
 Make the "Sony | Music Center" connection
(page 17).
APP DISPLAY: A screen setting display of the
application is open.
 Exit the screen setting display of the application
to enable button operation.
APP LIST: The contents list of the USB is open.
 Exit the list of the application to enable button
operation.
APP MENU: A setting display of the application is
open.
 Exit the setting display of the application to
enable button operation.
APP NO DEV: The device with the application
installed is not connected or recognized.
 Make the BLUETOOTH connection and establish
the "Sony | Music Center" connection again
(page 17).
30
GB
APP SOUND: A sound setting display of the
application is open.
 Exit the sound setting display of the application
to enable button operation.
OPEN APP: The "Sony | Music Center" application is
not running.
 Launch the application.
For steering wheel remote control
operation:
ERROR: An error occurred during the function
registration.
 Register again from the function where the error
occurred (page 20).
TIMEOUT: The function registration failed due to a
timeout.
 Try completing the registration while [REGISTER]
is blinking (about 6 seconds) (page 20).
For firmware update operation:
FILE ERROR: The updater is not stored in the USB
device.
 Store the updater in the USB device, then try
again (page 22).
UPDATE ERROR PRESS ENTER: Firmware update is
not completed properly.
 Press ENTER to clear the message, then try again.
During the update, do not turn the ignition to the
OFF position, nor remove the USB device
(page 22).
 Insert the USB device storing the updater, and
then press ENTER.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.