Before Returning For Repairs; Specifications; Replacement Parts - Schumacher Electric XM1-5-CA Manual Del Usuario

PROBLEM
The charger
will not turn on
when properly
connected.
I cannot select a
6V or 12V setting.

15. BEFORE RETURNING FOR REPAIRS

or call 1-800-621-5485, Monday-Friday 7:00
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE
AUTHORIZATION (RMA) number from Customer Service at Schumacher
Electric Corporation.

16. SPECIFICATIONS

Input Voltage ......................................................... 120V AC @ 60Hz, .40A
Output Voltage .............................. 6V or 12V, with Auto Voltage Detection
Output Current Rating ................................................. 1.5A @ 6V and 12V
17.

REPLACEMENT PARTS

Ring connectors (quick-connect) ............................................2299001950
Battery clamps (quick-connect)...............................................3899001235
POSSIBLE CAUSE
AC outlet is dead.
Poor electrical connection.
Battery is defective.
The charger is equipped
with Auto Voltage Detection,
which automatically detects
the voltage and charges the
battery.
For information about troubleshooting,
contact customer service for assistance:
[email protected]
www.batterychargers.com
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and
extension cord for loose
fitting plug.
Have battery checked.
No problem; this is normal.
• 12 •
REASON/SOLUTION
to 5:00 CST
am pm