Installing The Brushes - Nilfisk-Advance Adhancer BA 855 TRIO EDS Instrucciones De Uso

A-10 / ENGLISH

INSTALLING THE BRUSHES

CAUTION!
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1 Make sure the Brush Deck is in the RAISED position. Make sure the Key Switch (A) is off (O).
2 See Figure 2. Pull the Hairpins (36) to remove the side bristle skirts (8). To access the brushes loosen the black knobs (one on each side)
on top of the idler assemblies (29) and remove the idler assemblies. Slide the brush into the housing, lift slightly, push and turn until it seats.
Re-install the idler assemblies and bristle skirts.
Note: These machines use special high speed brushes. Replace only with proper replacement brushes.
FIGURE 2
A-10 - 56041640 - Adhancer / BA 855 TRIO EDS
™ ™