Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SimpleHome module Art. 20004601 has 3 inputs (voltage-free
contacts, E.G. buttons, sensors, etc...) and 3 outputs, 2 of which
require connection of an external relay (E.G. Art. 20004603) while the
other controls an on-board 10A relay (this can be programmed as a
NO. NC. output using suitable programming software).
Module Art. 20004601 allows flush mounting in residential series
boxes or on DIN rails.
Power supply voltage
Absorption
Outputs
Indications
Positioning
Approvals
Operating temperature
Storage temperature
Relative air humidity
Weight
Dimensions
* With access allowed only for support or servicing by qualified personnel
Technical characteristics
24 Vdc ± 5%
MAX. 115 mA
• 1 10A relay output (230 Vac), resistive
loads
• 2 transistor outputs +24 Vdc with output
active, Max. 50 mA
• 1 LED (red) indicating relay active
• 1 LED (yellow) indicating bus status: when
flashing, indicates data transmission over
the bus; when lit steadily, indicates lack
of power supply negative or incorrect
connection of the device
On a DIN rail on a dedicated control panel
or in junction boxes
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation
70 g (not including packaging)
58x53x18 mm (1 DIN module)
5
Tabla de contenido
